[cisco-voip] Teleconferencing question

[NateCCIE]

Look at the shire micro flex advance ceiling mount. 

http://www.shure.com/americas/microflex-advance

Watch the demo videos and be amazed. 

Sent from my iPhone

> On Feb 13, 2017, at 10:37 AM, Ben Amick <bamick at HumanArc.com> wrote:
> 
> Read below for my initial thoughts, but I just did a google since I went to a cisco facility the other day and saw the new cisco Telepresence ceiling mics, which are 4-pin mini jack and are compatible with even the low end video solutions such as the SX10/20, which lowers the price point of your possible video solution, and the audioscience I mention below is now EoL. (link for those curious: http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-microphones/datasheet-c78-736073.html)
>  
> If it wasn’t for the malleability of the tables, I’d suggest getting a daisy chain unit to extend out both the speaker and the microphones across a longer distance.
>  
> However, if you’re going to look at teleconferencing with the possibility of video, I’d look for an C-series telepresence codec with the XLR based Audioscience ceiling microphones. The configuration of those would allow you to suspend them around the room. This would also enable you to gain much better audio quality around the room, as well as be able to properly integrate wall-mounted displays and the such and multiple video inputs.
>  
> Short of that, an MX 7/800 series (or SX series if you already have displays) unit could enable you for videoconferencing with less facility tie-in, and the higher end units also support the XLR based audioscience mics.
>  
> Ben Amick
> Telecom Analyst
>  
> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Terry Oakley
> Sent: Monday, February 13, 2017 11:55 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Teleconferencing question
>  
> We have a board room 25’ by 40’, that we currently have an 8831 conferencing unit in with the two external mics.   The unit works well but with only the two mics does not adequately cover the room.   Do any of you have suggestions as to how we can add the necessary mic coverage into the room but at the same time keep it neat and tidy?   The room is often use for our College’s Board meeting and will have 18 to 30 guests invited to the meeting.   The setup is 12 tables on castors, that are arranged in an oval but can be separated or arranged differently for other events.
>  
> We do have WebEx, IM&Presence available if something there would allow us to provide a better teleconferencing solution.   I am think we should just do a full blown conferencing suite, video and tele but want to know if there are other solutions that I have not seen or more likely thought of.
>  
> Thanks
>  
> Terry
>  
> Terry Oakley
> Telecommunications Coordinator | Information Technology Services
> Red Deer College |100 College Blvd. | Box 5005 | Red Deer | Alberta | T4N 5H5
> work (403) 342-3521   |  FAX (403) 343-4034
>  
> 
> Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170213/3d9578ea/attachment.html>