[cisco-voip] Expressway blues

[Charles Goldsmith]

Last time I looked, those certs did not support multi-SAN, so you will have
a rough time getting things working I think.

On Fri, Feb 17, 2017 at 5:39 PM, Carlos G Mendioroz via cisco-voip <
cisco-voip at puck.nether.net> wrote:

> Hi,
> I'm trying to get a pair of Expressway to work with, at least, Jabber
> for windows.
>
> After a couple of days w/o success with 8.5.3, I reinstalled with 8.9.1.
> Certs are from StartSSL, C/E pair config seems fine (Traversal zone ok,
> ssh tunnel active). Internal CM/CUPS/CUC with no TLS verify (using default
> Self Signed Certs).
>
> SRVs are in place, but no joy. The Jabber client (10.6) connects fine
> internally, but when trying to access from the outside, it fails with
> server connection failure.
>
> Tried with SSO disabled on the Expressways, also with it set to On.
> (Only one CM/CUPS/CUC server inside, no SSO there, 10.5.2)
>
> Help ?
>
> --
> Carlos G Mendioroz  <tron at huapi.ba.ar>  LW7 EQI  Argentina
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170217/a6721ca9/attachment.html>