[cisco-voip] Cluster setup with 2 Subs - Sub 2 did not pick up the load.

[Gary_Bates_Command_Solutions]

My client had an issue where the 2nd sub did not register any phones when
the Pub and primary Sub failed.

 

This is a 1500 seat call centre so it caused a massive problem.

 

All phones have the IP addresses of both subs in their TFTP server lists.
Network routing confirmed ok. Call Manager / TFTP service running on both
Subs. DB replication status good.

 

Could someone confirm that if Pub / Sub 1 go down, Sub 2 should allow phone/
device registration and calls to still work ?

 

Regards

 

 Gary Bates

 Voice and Network Specialist 

 CCIE #53842

 



 

 Mobile 0424 229 995 ( + 61 424 229995 )

 Email:  <mailto:garycomsolutions at iprimus.com.au>
gbates at commandsolutions.com.au  

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170130/4df99885/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2737 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170130/4df99885/attachment.jpg>