[cisco-voip] Panic Button Solution?

[Lelio Fulgenzi]

ok. was not aware of the 1:1 requirements. might still work if the demand is low.


how would the other solutions satisfy your concerns though? if they want silence and no ringing? i'm just not seeing it.


---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1


________________________________
From: Ben Amick <bamick at HumanArc.com>
Sent: Monday, January 30, 2017 4:35 PM
To: Lelio Fulgenzi; cisco-voip at puck.nether.net
Subject: RE: Panic Button Solution?


Issue with intercom is it is strictly a 1:1 relationship, and would require a seemingly infinite number of sidecars on the campus police, as it requires the intercom button on both devices., at least in my experience. It also doesn’t establish a conversation, so you have no idea if anyone is actually listening on the other end.



Ben Amick

Telecom Analyst



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Monday, January 30, 2017 4:33 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Panic Button Solution?





How about Intercom? From what I remember (and read below) it's a feature which automatically connects the caller to the recipient in whisper mode so that the called party hears everything but can't actually talk back until they initiate so. No ringing, auto-answer. I'm not sure if there is a one-to-one or one-to-many relationship and how that would work at the end unit. But that being said, that would be a problem with any solution. Multiple locations sending panic calls to one destination (campus police).



If it were me, I'd investigate intercoms.



http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html

[http://www.cisco.com/web/fw/i/logo-open-graph.gif]<http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html>

[http://www.cisco.com/web/fw/i/logo-open-graph.gif]<http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html>

Features and Services Guide for Cisco Unified ...<http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html>
www.cisco.com
Features and Services Guide for Cisco Unified Communications Manager, Release 10.0(1) -Intercom




Features and Services Guide for Cisco Unified ...<http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html>

www.cisco.com<http://www.cisco.com>

Features and Services Guide for Cisco Unified Communications Manager, Release 10.0(1) -Intercom






---

Lelio Fulgenzi, B.A.

Senior Analyst, Network Infrastructure

Computing and Communications Services (CCS)

University of Guelph



519-824-4120 Ext 56354

lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>

Room 037, Animal Science and Nutrition Building

Guelph, Ontario, N1G 2W1



________________________________

From: cisco-voip <cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>> on behalf of Lisa Notarianni <lisa.notarianni at scranton.edu<mailto:lisa.notarianni at scranton.edu>>
Sent: Monday, January 30, 2017 4:18 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Panic Button Solution?



Call Manager 10.5.2.12901-1



I have a request from a department here at The University of Scranton to use a button on their phone as a panic button that would do the following:

1.       Automatically dial our Police department without a ring tone

2.       Provide one way communication to University Police so they can listen to the conversation to get an idea of the issue and then dispatch an officer

It is important to have silence on the phone connection when the button is pressed

I looked into PLAR but I don’t think it can be configured exactly this way.  We have a SingleWire server but it is in the process of being upgraded. So, before we install a physical panic button without a voice feature, we wondered if there were any other creative solutions.

Thank you in advance -

Lisa Notarianni

[Lisa Notarianni Telecom Engineer]





Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170130/4ffd641d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 20842 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170130/4ffd641d/attachment.png>