[cisco-voip] Register MX300 G2 to CMR Cloud

[Reto Gassmann]

Hello Ryan

Thanks for your input. I finally registered the MX300 to Spark. However,
there is a room license needed for that.

Regards Reto

Ryan Huff <ryanhuff at outlook.com> schrieb am Mi. 31. Mai 2017 um 15:48:

> Also, to correct an earlier typo (my iPhone keyboard is for real this
> morning); a CMR URI would look like "WebExMeetingNumber at Company.Webex.com
> ".
>
> Sent from my iPhone
>
> On May 31, 2017, at 9:44 AM, Ryan Huff <ryanhuff at outlook.com> wrote:
>
> Either way, you will need some sort of SIP registrar/proxy whether that is
> CUCM, Expressway or Collaboration Cloud (Spark) as the Codec's firmware
> alone does not provide that functionality.
>
> Sent from my iPhone
>
> On May 31, 2017, at 9:38 AM, Ryan Huff <ryanhuff at outlook.com> wrote:
>
> Are you speaking about registering the endpoint to the Collaboration Cloud
> (Spark), or being able to use the endpoint with CMR Cloud?
>
> CMR Cloud is really nothing more than a specialize URI string
> (Meeting.Company. at webex.com) in a b2b call through expressway (which by
> the way, will not burn a traversal license as long as the URI is not
> transformed in Expressway).
>
> You'd also need to turn the CMR Cloud feature on in your WebEx
> Administration portal.
>
> If you don't want to have a call control server to register the endpoint
> to, you could register to the Expressway control server. However, you
> cannot register the endpoint to WebEx cloud (CMR Cloud).
>
> If you are talking about Collaboration Cloud (read Spark), then yes, a
> MX300 G2 can register to Spark. You would need to upgrade the codec's
> firmware to the latest Collaboration Endpoint (CE) version if it is still
> using the old Telepresence firmware.
>
> Here is a list of codecs that can register to the Collaboration Cloud
> (Spark):
> https://support.ciscospark.com/customer/en/portal/articles/2349263-cisco-spark-room-devices-guide
>
> Thanks,
>
> Ryan
>
> On May 31, 2017, at 9:10 AM, Reto Gassmann <voip at mrga.ch> wrote:
>
> Hello Group
>
> We have new Webex Accounts with CMR.
> It is possible to connect and register a MX300 G2 direct to CMR Cloud. We
> want to use it for Webexmeetings but we don't want to have a on premise
> installation to register the MX300 G2 to.
>
> Thanks for help
> Regards Reto
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170616/0a10a9e6/attachment.html>