[cisco-voip] um, where'd the scheduled backups go in PLM

[Pawlowski, Adam]

You can schedule it from the CLI but I find that restarting this machine in the past has turned this backup off, and I would have to go reschedule it and turn it on.

If you're using it for usage reporting this is probably more concerning than if it is just providing licensing. Since we don't often issue new licenses out into our system the "restore" would just be missing that usage data but would be fine to restore licensing should we have to rebuild this machine. (Standalone PLM).

Supposedly it is gone after 11.5 anyways so I am not too concerned about it. I don't know how the "satellite" works at this point to tell if it is just the same thing as PLM again or not.

Best,

Adam Pawlowski
SUNYAB NCS




--------------


Message: 5
Date: Tue, 27 Jun 2017 14:31:22 +0000
From: Lelio Fulgenzi <lelio at uoguelph.ca>
To: Ryan Huff <ryanhuff at outlook.com>
Cc: "voyp list, cisco-voip (cisco-voip at puck.nether.net)"
	<cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] um, where'd the scheduled backups go in PLM
Message-ID:
	<YTXPR01MB0640409342BA98EA4AAD5441ACDC0 at YTXPR01MB0640.CANPRD01.PROD.OUTLOOK.COM>
	
Content-Type: text/plain; charset="utf-8"


Yes ? we?re looking at a stand alone PLM. We have multiple voicemail and cucm clusters and liked the idea of separate xLMs.

In the GUI, I just have backup/restore. That?s it. No devices, no schedules, nothing. Not even # of copies to keep. Docs say that?s limited to 2.



---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1

From: Ryan Huff [mailto:ryanhuff at outlook.com]
Sent: Tuesday, June 27, 2017 10:19 AM
To: Lelio Fulgenzi
Cc: voyp list, cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] um, where'd the scheduled backups go in PLM

Are you dealing with a standalone PLM? If it's co-res, you'd just backup the PLM feature in the normal CUCM DRS.

For standalone, you should be able to use all the normal CLI DRS utilities (or activate the CUCM application for the purpose of accessing DRS).

Thanks,

Ryan

On Jun 27, 2017, at 10:13 AM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:

So, just setting up PLM, and I noticed, surprisingly enough, that the backup/restore menu is a simplified menu of what ELM had.

Basically, just backup/restore.

No scheduled backups, no different backup device configurations.

While I can appreciate not much changing in the licensing manager, it?s still a drag to see this gone. We built some workflow and recovery strategies based on this.

Any ideas as to why this happened?


---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170627/14f2d705/attachment-0001.html>