[cisco-voip] SX20 add to Call Manager

[Terry Oakley]

Thank you Matt.   MRA is not in play… at least not right now.  ☺

From: Matt Jacobson [mailto:m4ttjacobson at gmail.com]
Sent: May 11, 2017 8:20 AM
To: Terry Oakley <Terry.Oakley at rdc.ab.ca>
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SX20 add to Call Manager

Is MRA in play? If not, then the below doc should be what you need. There is also a CE8 on CUCM 11.x, but it is all relatively the same.Watch out for running CE8 on SX20, there are peripheral requirements older SX20 units may not meet.

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf


On Thu, May 11, 2017 at 5:14 PM, Terry Oakley <Terry.Oakley at rdc.ab.ca<mailto:Terry.Oakley at rdc.ab.ca>> wrote:
Does anyone have a process document for adding a SX 20 unit to Call Manager environment to be a video endpoint?   We have Expressway C and E in place as well as IM and Presence.    We currently have the SX20’s going through a video gateway that has just failed and is EOS/EOL.

Any assistance would be wonderful.

Environment

CUCM 10.5
IM and Presence 10.5
Expressway C and E.
SX 20 (5 units)

Thank you in advance

Terry

Terry Oakley
Telecommunications Coordinator | Information Technology Services
Red Deer College |100 College Blvd. | Box 5005 | Red Deer | Alberta | T4N 5H5
work (403) 342-3521   |  FAX (403) 343-4034<tel:(403)%20343-4034>


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170511/99786ed3/attachment.html>