[cisco-voip] FXO port ignore battery failure

[Ben Amick]

I just want to ask why? The situation you're talking about makes me think of end stations, in which case you'd want to have an FXS port, not an FXO

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Norton, Mike
Sent: Friday, May 26, 2017 2:52 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO port ignore battery failure

I need to send a call out an FXO port that does not have talk battery or dialtone on the other end. Normally an FXO port will notice the lack of talk battery and the call will fail. Is there a way to configure the FXO port to not check for talk battery? This is on a 2900 running 15.3M.

--
Mike Norton
I.T. Specialist
Peace Wapiti School Division No. 76


Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170526/02a628ca/attachment.html>