[cisco-voip] FXO port ignore battery failure

Norton, Mike mikenorton at pwsd76.ab.ca
Fri May 26 17:57:10 EDT 2017


A station port would need to supply talk battery to the station, so yes that would need FXS, but no that's not what I want.

Basically I was trying to get a dry audio output for an overhead paging system. Kinda like you would with an E&M port, but I only have the FXO ports. The idea was for this to be a temporary workaround - contractor is installing a new paging system to replace a failed one but they are missing the module they need to interface with a telephone port, so in the meantime all they can accept is a dry audio feed.

Anyway, it is now looking like the paging contractor will be able to get the proper module they need by Monday, so I'm not going to bother trying to do the temporary workaround and I'll just do the normal FXO way next week.

-mn

From: Ben Amick [mailto:bamick at HumanArc.com]
Sent: May 26, 2017 3:37 PM
To: Norton, Mike <mikenorton at pwsd76.ab.ca>; cisco-voip at puck.nether.net
Subject: RE: FXO port ignore battery failure

I just want to ask why? The situation you're talking about makes me think of end stations, in which case you'd want to have an FXS port, not an FXO

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Norton, Mike
Sent: Friday, May 26, 2017 2:52 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] FXO port ignore battery failure

I need to send a call out an FXO port that does not have talk battery or dialtone on the other end. Normally an FXO port will notice the lack of talk battery and the call will fail. Is there a way to configure the FXO port to not check for talk battery? This is on a 2900 running 15.3M.

--
Mike Norton
I.T. Specialist
Peace Wapiti School Division No. 76

Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170526/256849a6/attachment.html>


More information about the cisco-voip mailing list