[cisco-voip] SX20 Remote Control Dialing IP address through CUCM

[Tyler Ronsman]

I've always found the * method a bit clunky and non user friendly.  I used
to use %ip_address%@ip but have since changed to using @outside for the
domain instead.  Some end users tend to get confused when you tell them
"type ip at ip".  It's a lot easier to say "type the ip address @ outside".
In either scenario you will need to add a SIP Route Pattern on CUCM to send
to Expressway Core or VCS Control, then a Transform on the Expressway Core
or VCS Control that strips the @outside suffix off of the call.

On Wed, Nov 22, 2017 at 9:04 AM, Brian Meade <bmeade90 at vt.edu> wrote:

> You want to dial x.x.x.x at domain.com based on that example.  Just use the
> dots, not stars.  I've also seen people setup for x.x.x.x at ip dialing
> where ip is the literal "ip".
>
> On Wed, Nov 22, 2017 at 8:42 AM, Anderson D'Assunção <
> anderdassuncao at gmail.com> wrote:
>
>> ​
>>  IMG_20171121_143816505.jpg
>> <https://drive.google.com/file/d/1-3PrGfwCedq19f_88qsihzY3PiI2EN9a/view?usp=drive_web>
>> ​​
>>  IMG_20171121_143807137_HDR.jpg
>> <https://drive.google.com/file/d/1lE-WUp6q4s2CZluDs_7r8OiRyrmkJKys/view?usp=drive_web>
>> ​
>> Hi Guys,
>>
>>     I'm with a litle issue with sx20 or sx10 dial IP address from remote
>> control by the user.
>>
>>     As the document with link bellow. I'm using to dial on video
>> endpoints registered on CUCM to IP Address with * . Example :  200*10*10*10
>>
>> https://www.cisco.com/c/en/us/support/docs/unified-communica
>> tions/telepresence-video-communication-server-vcs/
>> 118884-config-vcs-00.html
>>
>>    When the user tries to put the third * , sx20 or sx10 automatically
>> changes to . , so, user needs to backspace and put * again.
>>
>>      Do we have some configurations to make sx10 and sx10 does not change
>> automatically * for . ?
>>
>>      I didn't find anything about this.
>>
>> thanks
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171122/829fdc4e/attachment.html>