[cisco-voip] SX20 Remote Control Dialing IP address through CUCM

[Brian Meade]

You want to dial x.x.x.x at domain.com based on that example.  Just use the
dots, not stars.  I've also seen people setup for x.x.x.x at ip dialing where
ip is the literal "ip".

On Wed, Nov 22, 2017 at 8:42 AM, Anderson D'Assunção <
anderdassuncao at gmail.com> wrote:

> ​
>  IMG_20171121_143816505.jpg
> <https://drive.google.com/file/d/1-3PrGfwCedq19f_88qsihzY3PiI2EN9a/view?usp=drive_web>
> ​​
>  IMG_20171121_143807137_HDR.jpg
> <https://drive.google.com/file/d/1lE-WUp6q4s2CZluDs_7r8OiRyrmkJKys/view?usp=drive_web>
> ​
> Hi Guys,
>
>     I'm with a litle issue with sx20 or sx10 dial IP address from remote
> control by the user.
>
>     As the document with link bellow. I'm using to dial on video endpoints
> registered on CUCM to IP Address with * . Example :  200*10*10*10
>
> https://www.cisco.com/c/en/us/support/docs/unified-
> communications/telepresence-video-communication-server-
> vcs/118884-config-vcs-00.html
>
>    When the user tries to put the third * , sx20 or sx10 automatically
> changes to . , so, user needs to backspace and put * again.
>
>      Do we have some configurations to make sx10 and sx10 does not change
> automatically * for . ?
>
>      I didn't find anything about this.
>
> thanks
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171122/f09c4e54/attachment.html>