[cisco-voip] OT: Add move change

[Lelio Fulgenzi]

Thanks Stephen!

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

From: Stephen Welsh [mailto:stephen.welsh at unifiedfx.com]
Sent: Wednesday, September 06, 2017 3:16 PM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] OT: Add move change

Hi Lelio,

Kinda, you may still need to know the AXL data structure, however you don’t have to learn the CUCM Data Dictionary as the AXL models effectively ‘flatten’ the raw tables. Also it is a full CRUD interface, with a simple PUT operation you can update just part of phone record (i.e. description, Device pool). You can even copy a resource, i.e.

GET /AutomationFX/api/AXL/phone/SEP000000000001

Then submit the returned AXL model as a POST request to create a new/copy using a POST operation:

POST /AutomationFX/api/AXL/phone/SEP000000000002

Because it has a live testing interface you can perform live queries against CUCM to see what the data/model looks like. The interactive testing interface is there to test/learn the REST api, so that you can then create a script/application that could perform those operation in bulk, or as part of an existing application etc.

Ultimately this is designed to enable simple development against CUCM so anyone with general web development skills can easily create applications (provisioning, testing etc) against CUCM in a similar way that you can do with Cisco Spark.

We shall be posting a number of example scripts/application on the git hub site over the next few months before we launch. So the purpose of AutomationFX may be a bit abstract until we share some concrete examples.

Kind Regards

Stephen Welsh
CTO
UnifiedFX

Sent from my iPad

On 6 Sep 2017, at 19:06, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:

Hi Stephen,

Does this act a bit like a sandbox tool where I don’t have to learn the AXL library but use a GUI front end to do stuff and it makes the calls appropriately?

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

From: Stephen Welsh [mailto:stephen.welsh at unifiedfx.com]
Sent: Wednesday, September 06, 2017 1:33 PM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] OT: Add move change

Hi,
Co-incidentally we (UnifiedFX) are due to launch something that may be relevant called AutomationFX. It basically exposes CUCM API’s (i.e. AXL & CTI) via REST. You can call the REST API locally or via our ‘CloudFX’ connection from a secure cloud endpoint.

If you have a read over the following page it outlines what AutomationFX can do:

https://github.com/unifiedfx/awesome-automationfx

Kind Regards

Stephen Welsh
CTO
UnifiedFX

Sent from my iPad

On 6 Sep 2017, at 17:13, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:

The question I have surrounding this is do you swap mac addresses or do you do a super copy then delete old one?

There are many apps out there, both Cisco and third party, that are tied to the MAC address of the user’s phone.

We’ve seen swapping MAC addresses out is simple and makes sense for most Cisco apps, but for those third party apps that synchronize databases via AXL, it can cause havoc.

I’m leaning towards updating our MAC process to use supercopy and delete old phones as required in secondary systems.



---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, September 06, 2017 11:10 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] OT: Add move change

What do other use for add, moves and changes to there environments?

We have a home grown app that is not working well, to notify Telecom group about changes to the phones, new users, configuration changes, etc.

Does anyone know of any can'd or cloud based software?  Are there any that interface with Cisco to automate the process via AXL / SOAP?

Just putting my feelers out to see what is available.

Thanks

Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170906/ad1eceee/attachment.html>