[cisco-voip] dial -peers

[Anthony Holloway]

Yep, just configure your trunk group first:

trunk group PSTN
 description PSTN Trunks
 hunt-scheme sequential
!

Then assign the ports you want to the trunk group:

voice-port 0/2/0
 trunk-group PSTN 1
 description +16125551212
!

voice-port 0/2/1
 trunk-group PSTN 2
 description +16125551313
!

Then tell you dial-peer to use the trunk group as opposed to your port:

dial-peer voice 2298 pots
 trunkgroup PSTN
 description PSTN Calls
 destination-patter 2298
 prefix 5197412298
!

On Thu, Sep 14, 2017 at 5:53 PM <norm.nicholson at kitchener.ca> wrote:

>
>
> I am sending calls to 2298 to this port as a test of our 911 PSTN lines at
> different locations. Is it possible to send it to a trunk group verses a
> port  ?
>
>
>
>
>
>
>
>
>
> dial-peer voice 2298 pots
>
> destination-pattern 2298
>
> port 0/1/0
>
> prefix 5197412298 <(519)%20741-2298>
>
>
>
>
>
>
>
> Thanks
>
>
>
>
>
>
>
>
>
> *Norm Nicholson*
>
> *Telecom Analyst*
>
> *City of Kitchener*
>
> *(519) 741-2200 x 7000 <(519)%20741-2200>*
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170915/d3f55dac/attachment.html>