[cisco-voip] e164 dialplan conversion

[Florian Kroessbacher]

Hy out there,

throug updateLine this is working

use old pattern & partition
and set newpattern

we have done this for 12000 Lines

Am 21. Sep. 2017, 15:13 +0200 schrieb Bill Talley <btalley at gmail.com>:
> I know there have been some conversations around this in the past, but I’m hoping there are new methods for converting from a 4-digit to full e164 dialplan.
>
> Is there a way to change dialplan entries on CUCM and UCCX without having to either individually touch each dialplan pattern or without deleting and reimporting/recreating? Has anyone seen or used AXL/SOAP to automate modification of dialplan patterns, or used PCP or some third party product to accomplish this?
>
> Thanks for any feedback.
>
> Bill
>
> Sent from a mobile device with very tiny touchscreen input keys. Please excude my typtos.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170921/5fd0d480/attachment.html>