[cisco-voip] CUAC Standard for Windows 10

[Jonathan Charles]

I would like to update that this is what got it to work on a Windows 8
machine... the same process did NOT work on Windows 10 (it launches and
never asks for licensing info).

Jonathan

On Fri, Aug 10, 2018 at 8:01 PM Jonathan Charles <jonvoip at gmail.com> wrote:

> I think I just figured out the silliness here...
>
> Make sure you download and install the TAPI client from CUCM... already
> did that...
>
> Well, configure it and make sure that you use the SAME application userID
> that you used fort he CUAC install... so it has control over the same
> devices.
>
> That got rid of the 'see your admin' no extensions found thing... and it
> did launch and I have phone control...
>
> The directory is another matter, it is jacked.
>
>
> Jonathan
>
> On Fri, Aug 10, 2018 at 7:49 PM Brian Meade <bmeade90 at vt.edu> wrote:
>
>> Good timing.  Doing the same thing this very minute.  CUAC Standard
>> 12.0.3 on Windows 10 with CUCM 11.5.
>>
>> Not able to get it working.  I'm getting the Socket Bind failed message
>> on login as described here-
>> https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh79669/?rfs=iqvred
>>
>> It looks like it is cosmetic so not sure if I should ignore or not.
>>
>> Mine hangs at finding devices associated with the application user.
>> Tried manual TSP install as well with no luck.
>>
>> TSP logs just show the binding being okay then nothing else.
>>
>> Probably going to open a TAC case Monday.
>>
>> On Fri, Aug 10, 2018 at 5:52 PM Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>
>>> So, doco says it is supported, forum posts say it isn't supported...
>>>
>>>
>>> https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-attendant-consoles/118860-technote-cuacs-00.html
>>>
>>>
>>> https://community.cisco.com/t5/ip-telephony-and-phones/attendant-console-standard-working-on-windows-10-machine/td-p/2875607
>>>
>>>
>>>
>>> Have CUAC Standard 12.0.3
>>>
>>> CUCM 12.0.1.21900-7
>>>
>>> Any secrets on how to make it work?
>>>
>>> Install on Windows 8, it comes up and asks for license when launched...
>>> on Windows 10, nothing.... launches and just says to contact your admin...
>>> I have installed the TSP manually as well, no joy.
>>>
>>>
>>> Jonathan
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180811/933cbc04/attachment.html>