[cisco-voip] CUAC Standard for Windows 10

[Jonathan Charles]

OK, for future reference, run it in Compatability Mode for Windows 8 and it
runs fine on Windows 10

On Sat, Aug 11, 2018 at 10:45 AM Jonathan Charles <jonvoip at gmail.com> wrote:

> I would like to update that this is what got it to work on a Windows 8
> machine... the same process did NOT work on Windows 10 (it launches and
> never asks for licensing info).
>
> Jonathan
>
> On Fri, Aug 10, 2018 at 8:01 PM Jonathan Charles <jonvoip at gmail.com>
> wrote:
>
>> I think I just figured out the silliness here...
>>
>> Make sure you download and install the TAPI client from CUCM... already
>> did that...
>>
>> Well, configure it and make sure that you use the SAME application userID
>> that you used fort he CUAC install... so it has control over the same
>> devices.
>>
>> That got rid of the 'see your admin' no extensions found thing... and it
>> did launch and I have phone control...
>>
>> The directory is another matter, it is jacked.
>>
>>
>> Jonathan
>>
>> On Fri, Aug 10, 2018 at 7:49 PM Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> Good timing.  Doing the same thing this very minute.  CUAC Standard
>>> 12.0.3 on Windows 10 with CUCM 11.5.
>>>
>>> Not able to get it working.  I'm getting the Socket Bind failed message
>>> on login as described here-
>>> https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh79669/?rfs=iqvred
>>>
>>> It looks like it is cosmetic so not sure if I should ignore or not.
>>>
>>> Mine hangs at finding devices associated with the application user.
>>> Tried manual TSP install as well with no luck.
>>>
>>> TSP logs just show the binding being okay then nothing else.
>>>
>>> Probably going to open a TAC case Monday.
>>>
>>> On Fri, Aug 10, 2018 at 5:52 PM Jonathan Charles <jonvoip at gmail.com>
>>> wrote:
>>>
>>>> So, doco says it is supported, forum posts say it isn't supported...
>>>>
>>>>
>>>> https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-attendant-consoles/118860-technote-cuacs-00.html
>>>>
>>>>
>>>> https://community.cisco.com/t5/ip-telephony-and-phones/attendant-console-standard-working-on-windows-10-machine/td-p/2875607
>>>>
>>>>
>>>>
>>>> Have CUAC Standard 12.0.3
>>>>
>>>> CUCM 12.0.1.21900-7
>>>>
>>>> Any secrets on how to make it work?
>>>>
>>>> Install on Windows 8, it comes up and asks for license when launched...
>>>> on Windows 10, nothing.... launches and just says to contact your admin...
>>>> I have installed the TSP manually as well, no joy.
>>>>
>>>>
>>>> Jonathan
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180813/3beed63b/attachment.html>