[cisco-voip] dialing WebEx from CUCM/Expressway

[Lelio Fulgenzi]

Just reading through the Cisco Webex Meetings Enterprise Deployment Guide for Video Device-Enabled Meetings<https://www.cisco.com/c/dam/en/us/td/docs/collaboration/webex_centers/esp/WebEx_Meeting_Center_Video_Conferencing_Enterprise_Deployment_Guide_WBS31_WBS32.pdf> doc, and on page 20 and 21 it talks about simplifying the dialing.

It talks about setting up a route pattern on CUCM and doing the transformation on Expressway.

I was hoping to do all the transformation on CUCM, since that's what I'm more used to.

I've got a domain based SIP route pattern working, I can dial user at acme.webex.com<mailto:user at acme.webex.com> and get into the personal room.

I'd like to set up something like *88.XXXXXXXXX to go right to the meeting and also a pilot, 88888, to go to the IVR menu.

Is there no way to modify *88.XXXXXXXXX on CUCM to send calls to XXXXXXXXX at acme.webex.com<mailto:XXXXXXXXX at acme.webex.com> and then it finds the SIP route pattern? Same with the pilot?



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 19753 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180829/6770ad3c/attachment.bin>