[cisco-voip] dialing WebEx from CUCM/Expressway

[Brian Meade]

There's no way in CUCM to modify URIs other than SIP Normalization Scripts
as far as I'm aware.

On Wed, Aug 29, 2018 at 11:20 AM Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> Just reading through the Cisco Webex Meetings Enterprise Deployment Guide
> for Video Device-Enabled Meetings<
> https://www.cisco.com/c/dam/en/us/td/docs/collaboration/webex_centers/esp/WebEx_Meeting_Center_Video_Conferencing_Enterprise_Deployment_Guide_WBS31_WBS32.pdf>
> doc, and on page 20 and 21 it talks about simplifying the dialing.
>
> It talks about setting up a route pattern on CUCM and doing the
> transformation on Expressway.
>
> I was hoping to do all the transformation on CUCM, since that's what I'm
> more used to.
>
> I've got a domain based SIP route pattern working, I can dial
> user at acme.webex.com<mailto:user at acme.webex.com> and get into the personal
> room.
>
> I'd like to set up something like *88.XXXXXXXXX to go right to the meeting
> and also a pilot, 88888, to go to the IVR menu.
>
> Is there no way to modify *88.XXXXXXXXX on CUCM to send calls to
> XXXXXXXXX at acme.webex.com<mailto:XXXXXXXXX at acme.webex.com> and then it
> finds the SIP route pattern? Same with the pilot?
>
>
>
> ---
> Lelio Fulgenzi, B.A. | Senior Analyst
> Computing and Communications Services | University of Guelph
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
> 519-824-4120 Ext. 56354 | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
>
> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram,
> Twitter and Facebook
>
> [University of Guelph Cornerstone with Improve Life tagline]
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180829/9f5891b1/attachment.html>