[cisco-voip] Exchange MWI to CME via QSIG T1 PRI

[Brian Meade]

Bill,

Do you see the MWI messages showing up in the QSIG debugs?

If it's showing up there, I think something like this may work:

voice service voip
 qsig decode

telephony-service
 voicemail <number>

ephone-dn <tag>
 mwi qsig


from
https://supportforums.cisco.com/t5/collaboration-voice-and-video/qsig/ta-p/3126953

On Mon, Jun 4, 2018 at 5:04 PM, Hendrix, Bill W. - US <
george.hendrix at caci.com> wrote:

> Hey guys,
>
>
>
>   We have a CME system that has been working with via a T1 PRI QSIG
> connection.  MWI and voicemail worked fine with Unity Connection.  The
> users on this system have been migrated to Exchange UM. Voicemail is
> working but not MWI.  With the Exchange integration, it’s a SIP trunk and
> from Exchange and CUCM, then it goes thru an MGCP gateway via QSGI digital
> PRI to the CME router.  With Exchange, there are no MWI numbers for CME to
> point to.  Anyone have any insight on what to do to get this working?  The
> T1 link cannot be converted to SIP.
>
>
>
> Exchange <SIP> CUCM <MGCP> Gateway <QSIG PRI> CME
>
>
>
> Thanks,
>
>
>
> Bill
>
> george.hendrix at caci.com
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180604/44a6f824/attachment.html>