[cisco-voip] ISDN T1 voice calls hardware validation
Ryan Huff
ryanhuff at outlook.com
Fri May 4 11:43:39 EDT 2018
I assume you have the card type specified and controller interface configured with timeslots?
Can you send the running-config and code version?
Sent from my iPhone
On May 4, 2018, at 11:35, Patrick Fortin <pfortin at royaume.com<mailto:pfortin at royaume.com>> wrote:
Hi
I get this error
**ERROR**: call_incoming: Received a call id 0x2F with a bad bearercap from xxxxxxxxxx on b channel 1
seems like the dsp are not associated with the t1 card
in the config we don't have acces to the following :
isdn incoming-voice voice
which should go on the Serial interface.
we also don't have the "port" command that should go in the dial-peer voice section
any ideas ?
Thanks
Pat
----- Original Message -----
From: Ryan Huff<mailto:ryanhuff at outlook.com>
To: PF<mailto:pucknether at foril.com>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Friday, May 04, 2018 11:11 AM
Subject: Re: [cisco-voip] ISDN T1 voice calls hardware validation
That correct! I misread! Yeah the shared port adapter T1 should work.
Sent from my iPhone
On May 4, 2018, at 10:36, PF <pucknether at foril.com<mailto:pucknether at foril.com>> wrote:
Hi
Thanks for your help
But there are no NIM slot in the ASR1006 chassis
NIM is for ASR1001-X I think
Pat
----- Original Message -----
From: Ryan Huff<mailto:ryanhuff at outlook.com>
To: PF<mailto:pucknether at foril.com>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Friday, May 04, 2018 9:56 AM
Subject: Re: [cisco-voip] ISDN T1 voice calls hardware validation
For isdn voice you’ll need a NIM-8MFT-T1/E1
Sent from my iPhone
On May 4, 2018, at 09:31, PF <pucknether at foril.com<mailto:pucknether at foril.com>> wrote:
Hi
Can someone help us validate if we can use this hardware to receive voice calls from a isdn T1 (23B+D) and send them in SIP to a softswitch and vice-versa
ASR1006
SPA-8XCHT1/E1
SPA-DSP
ASR1000-RP2
ASR1000-ESP40
in short can it be used to build a voip gateway like an audiocode mediant or a patton smartnode
Thanks
Pat
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180504/4540cfb8/attachment.html>
More information about the cisco-voip
mailing list