[cisco-voip] multiple domain support for jabber (both internal and MRA)

[naresh rathore]

hi



I have to configure Cisco Jabber for both Internal and MRA login. user information is already imported from LDAP. this environment take care of telephony requirement of two companies. so there are two domains (for e.g. oneacmeone.com and twoacmetwo.com). i have following queries.


  1.   what configuration changes are required on im and presence?
  2.   do i have to make changes on expressway e and c in regards to support of multiple domain?
  3.   i think i have to change jabber-config file as well?


I found following link. Pls suggest.


https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118999-config-imaddress-jabber-00.html

[https://www.cisco.com/web/fw/i/logo-open-graph.gif]<https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118999-config-imaddress-jabber-00.html>

Configure the IM Address Scheme for Multiple Domain ...<https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118999-config-imaddress-jabber-00.html>
www.cisco.com
This document describes the configurations required in order to use flexible instant messaging (IM) address scheme with Cisco Jabber. The feature is supported from Cisco Jabber version 10.6 and later and IM Presence server 10.x.





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180520/91d31669/attachment.html>