[cisco-voip] TelePresence DX80 and CUCM 11.5

[Ryan Ratliff (rratliff)]

You need CE9.4 on the DX for it to apply that setting from CUCM.

-Ryan

On Nov 14, 2018, at 10:42 AM, Jason Aarons (Americas) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:



I have a CUCM 11.5.1SU5 registered DX80 running CE 9.2.2

In CUCM under Device > Phone was does Settings Menu Mode supposed to do if set to Restricted?  I set it to Restricted and find I can still edit setting on the screen gui of DX80.  Nothing seems restricted, factory reset, time zone, etc.

Just trying to limit end users for editing some items.

Jason Aarons, CCIEx2 No. 38564
Advanced Technology Consultant
Dimension Data
904-338-3245



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx> _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181114/ebbd681c/attachment.html>