[cisco-voip] Roomkit only dials SIP uri from phonebook :(

[Ryan Ratliff (rratliff)]

There have been a number of bugs raised for this since CE came out. You can dial the DN if you search via the admin web page under call control, but not in the Touch.

As for getting URIs on your DNs, that can be done automatically with device association and setting the primary DN for the end user.

-Ryan

On Sep 29, 2018, at 12:18 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:


Finally got phonebook working within my roomkit. Turned out, the partner forgot to disable the “8.0” enterprise parameter after our migration and TVS certificate wasn’t making its way to the unit.

Anyways, when I select a search result, my only option is to dial the SIP uri (email address in our case) and no option to select the telephone number entry. On the sx20 running tc software, at least I can drill down and select the telephone number.

Anyone find a way around this? I mean, other than manually adding SIP Uris to every DN?


-sent from mobile device-

Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<x-apple-data-detectors://1/0>
519-824-4120 Ext. 56354<tel:519-824-4120;56354> | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181003/2bca1bf8/attachment.html>