[cisco-voip] Is It Possible To Dial A PLAR Configured Line?

[Gary Parker]

> On 5 Oct 2018, at 11:10, daniele visaggio <visaggio.daniele at gmail.com> wrote:
> 
> I think you should avoid placing your room's dn in the EAC_PLAR_PT partition. Just use a regular partition: the EAC_PLAR_PT should be associated only to the translation pattern with the blank translation pattern string.
> 
> Place EAC_PLAR_PT inside a CSS called e.g. PLAR_to_Reception and give this CSS to the phones. But dn stay in EAC_PT partition.
> 
> Sounds good?

Perfecto!

So simple, hadn’t even considered that. Sometimes you get so deep into the guts of something the obvious solution eludes you.

Thanks Daniele

Gary
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181005/44ae00ca/attachment.sig>