[cisco-voip] [EXTERNAL] Re: 8832 Design Issue?

[Lelio Fulgenzi]

Well, this is not encouraging to hear. ☹

And there’s likely no spot to put anything with a wire tie either? Usually, they have those little plastic hooks, like the ones that would hold an rj11 cable.



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of JASON BURWELL
Sent: Tuesday, October 9, 2018 3:49 PM
To: 'Nimloth' <nimloth at nimloth.pl>
Cc: cisco-voip voyp list <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] [EXTERNAL] Re: 8832 Design Issue?

Yes, also we hit some bugs with an early FW release. Once it downgraded from the factory load, it would brick the phone. Must be a major issue because I had to wait almost 2 months for RMA fulfillment. Now that we are running current firmware with that bugfix, we seem to be past that issue but now seeing this problem.


From: Nimloth [mailto:nimloth at nimloth.pl]
Sent: Tuesday, October 09, 2018 3:40 PM
To: JASON BURWELL <JASON.BURWELL at foundersfcu.com<mailto:JASON.BURWELL at foundersfcu.com>>
Cc: cisco-voip voyp list <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: [EXTERNAL] Re: [cisco-voip] 8832 Design Issue?

CAUTION: This email originated outside of Founders Federal Credit Union. Do not click links or open attachments unless you recognize the sender and know the content is safe.
________________________________
To be honest I won't deploy 8832 in my org as we still struggling to get one up and running since few months. Few TAC/RMA already in progress.
W dniu 9 paź 2018, o 20:35, użytkownik JASON BURWELL <jason.burwell at foundersfcu.com<mailto:jason.burwell at foundersfcu.com>> napisał:
Has anyone else using 8832s had a problem with the USB-C cord coming unplugged from the phone when people grab it to slide or move the phone towards them? Starting to see some issues with this and I only have a few deployed so far. Hoping someone has figured out a workaround or clip to help retain the cord.


This was never a problem before because all the other Cisco Conf phones are not only held in by RJ45 clip but also cord clips made in to the base. The 8832 has neither, just USB-C cord that plugs in to the back. Thanks! Jason



________________________________

cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_cisco-2Dvoip&d=DwMFaQ&c=CrVsPA4meZ6vEtstSPLQqC5izq21_OrN_h8zxKzEuwc&r=cxTKAF4Iaor9PiEwHMcKcEgAJ-ObtwqWBXjTvqngqNk&m=22gMLJdSN74XK3lOj2uEqIn5DpBhBOlPlAHXgwa9z0A&s=3fRgiLqNilQGn2SajWlJxQ8Yq8_jdFjihyfQhNbH-aQ&e=>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181009/555412ec/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1297 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181009/555412ec/attachment.png>