[cisco-voip] Expressway version X8.11.x

[Shrek]

Im upgrading from 8.7.1 to 8.11.3 the tac engineer said nothing will change
and i can reuse the 16bit key said the other tac engineer from licensing.

Im very new myself. Our old version not compatable with tls 1.2. After that
we can register our telepresence dev with webex cloud.

On Thu, Oct 25, 2018, 4:22 PM John Kougoulos <john.kougoulos at gmail.com>
wrote:

> Hi,
>
> Even the factory reset might not work, because the factory-reset image is
> not in the OVA  and you need to upload it and add also a file with the
> release key somewhere in /mnt/.../factoryxxx/rk
> I was recently into this nightmare when I tried to change one of the
> hostnames, without following the documented procedure.
>
> Regards,
> John
>
> On Wed, Oct 24, 2018 at 11:03 PM Dana Tong <dana.tong at yellit.com.au>
> wrote:
>
>> This is after the TAC did a factory reset and rebuilt the cluster. It was
>> perfectly happy before it shat itself again. It's a cluster f@&$.
>>
>> The edge cluster is stable. Only the core.
>>
>> On 25 Oct 2018, at 4:05 am, Matt Jacobson <m4ttjacobson at gmail.com> wrote:
>>
>> You have some alerts, I would check what they say. We have several
>> clusters on x8.11.x all running fine, never seen anything like this as
>> well. Possibly look through the event or configuration logs for any cluster
>> related changes or events on that specific node.
>>
>> And then to “fix” this... take a full backup, read up on how to rejoin a
>> node to a cluster after a factory reset in cluster maintenance doc, and I’d
>> open a tac case before doing so.
>>
>> On Wed, Oct 24, 2018 at 10:50 Dana Tong <dana.tong at yellit.com.au> wrote:
>>
>>> What is it with new Expressway code?
>>>
>>>
>>>
>>> I have a cluster that was working happily and no one touched the config
>>> but all of a sudden it says that it is going to factory reset itself.
>>>
>>>
>>>
>>> Is there any way to avoid this?
>>>
>>>
>>>
>>> <image001.png>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181026/c4dd239c/attachment.html>