[cisco-voip] CUBE setup to Centurylink SIP Trunk

[Anthony Holloway]

That's interesting, I just performed the turn up of some CL SIP trunks this
month, and it was multi-tenant registrations on my CUBE with all the SIP
profile and config bloat.  Lucky you.

On Wed, Sep 12, 2018 at 7:38 PM Jason Aarons (Americas) <
jason.aarons at dimensiondata.com> wrote:

>
>
> I have a new CenturyLink SIP Service.  CenturyLink said it is new and
> doesn't match the Cisco guides.  (No more of the funky registrar and fixup
> headers via SIP profiles!)
>
>
>
> In short in CUBE they want me to send calls to them per these settings;
>
> SIP Signaling IP 6.6.156.245:5060
>
> RTP IP 6.6.156.244
>
> I'm just drawing a blank on how to setup CUBE to send SIP signaling
> requests to CenturyLink with different Signaling and RTP destination
> addresses.  Don't I just send session target ipv4:X.X.156.245:5060 and the
> SDP takes care of the RTP negotiation part?  Do I really care in my CUBE
> what their RTP address is?
>
>
>
>
>
> -jason
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer"
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180912/03ca8b4f/attachment.html>