[cisco-voip] CUBE setup to Centurylink SIP Trunk

[Brian Meade]

This is probably their Level3 SIP Service they bought out which is much
better.

On Wed, Sep 12, 2018 at 8:51 PM Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> That's interesting, I just performed the turn up of some CL SIP trunks
> this month, and it was multi-tenant registrations on my CUBE with all the
> SIP profile and config bloat.  Lucky you.
>
> On Wed, Sep 12, 2018 at 7:38 PM Jason Aarons (Americas) <
> jason.aarons at dimensiondata.com> wrote:
>
>>
>>
>> I have a new CenturyLink SIP Service.  CenturyLink said it is new and
>> doesn't match the Cisco guides.  (No more of the funky registrar and fixup
>> headers via SIP profiles!)
>>
>>
>>
>> In short in CUBE they want me to send calls to them per these settings;
>>
>> SIP Signaling IP 6.6.156.245:5060
>>
>> RTP IP 6.6.156.244
>>
>> I'm just drawing a blank on how to setup CUBE to send SIP signaling
>> requests to CenturyLink with different Signaling and RTP destination
>> addresses.  Don't I just send session target ipv4:X.X.156.245:5060 and the
>> SDP takes care of the RTP negotiation part?  Do I really care in my CUBE
>> what their RTP address is?
>>
>>
>>
>>
>>
>> -jason
>>
>>
>>
>>
>> This email and all contents are subject to the following disclaimer:
>> "http://www.dimensiondata.com/emaildisclaimer"
>> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180913/b8d5b8f0/attachment.html>