[cisco-voip] webkit fun!

[Lelio Fulgenzi]

Alright, got this webkit registered, both on-prem and through expressway. My testing while on expressway wasn't going so well, so I'm going to concentrate on on-prem first and certify all functions then move to expressway registration after that.

Biggest thing is that the SIP URI shows as DN at cucm-host.acme.com<mailto:DN at cucm-host.acme.com> which is causing me nothing but grief. This SIP URI won't work because we need to use the service domain to get calls in but this is what shows during proximity. Yuck.

I've tried changing it but it still doesn't work and it changes with every reset/re-registration.

I've tried adding SIP URIs in the user setup and on the DN setup but to no avail. For some reason, I think this is even breaking just DN dialing, using DN at servicedomain.acme.com<mailto:DN at servicedomain.acme.com> which was working to my SX20 without any SIP URI configuration, although the SX20 is using TC software, not CE.

I'm going to break out the admin and user guides, but thought I'd ask.

Also - what's the rule of thumb with setting things in CUCM Device Config Page vs Device GUI? It seems like I can change things on the device GUI, but if the setting exists in CUCM Device Config Page, that value overwrites on next reset.



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 19930 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180914/dfa062b3/attachment.bin>