[cisco-voip] Cisco ATA Devices need reset

[Gary Parker]

> On 18 Sep 2018, at 20:27, Lisa Notarianni <lisa.notarianni at scranton.edu> wrote:
> 
> Does anyone else out there ever have to do a hard reset on Cisco ATA devices because all of a sudden the ports are not registered in Call Manager?  We have a few buildings this happens often in.  We have to walk to the device and reset it.  This happens for any type of ATA we use; 186, 187 or 190.

Yup, we’re running 186s and 187s and had this constantly until I put a scheduled job on on the callmanager to restart all of them every Sunday morning at 3am. The weekly restart sorted the problem.

---
/-Gary Parker----------------------------------f--\
|     Unified Communications Service Manager      |
n      Loughborough University, IT Services       |
|     tel:+441509635635 sip:gary at lboro.ac.uk      o
|        https://www.osx.ninja/pubkey.txt         |
\r----------------------------------------------d-/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180919/1db02075/attachment.sig>