[cisco-voip] vg310/320 or ISR4K with analog modules

[Lelio Fulgenzi]

Yowza. That's not good. Is there a bug ID you can share? Is there a workaround? Software Reload? Power Reset?


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook



-----Original Message-----
From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Pawlowski, Adam
Sent: Friday, April 5, 2019 12:57 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] vg310/320 or ISR4K with analog modules

Would also be interested to know if there is anything going on with those other than the general (maybe?) sunset of IOS eventually.

There's a bug we got filed for IOS SCCP where sockets do not get cleaned up by the process, so if there are connectivity issues the gateways will just not re-register or operate. It's been fixed but the IOS release is not out yet. For a while we were deploying the VG310/320 and found them to be unreliable because of this. This impacts the VG204XM as well just takes a lot longer to become apparent. 

Adam
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip