[cisco-voip] vg310/320 or ISR4K with analog modules

[Lelio Fulgenzi]

Does this happen based on uptime or load/calls on the gateway? 

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook



-----Original Message-----
From: Pawlowski, Adam <ajp26 at buffalo.edu> 
Sent: Friday, April 5, 2019 1:46 PM
To: Lelio Fulgenzi <lelio at uoguelph.ca>; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] vg310/320 or ISR4K with analog modules

It is CSCvo11786 , fixed in a number of versions but none that I'm aware of being public yet. This was a real pain to identify but caught it on a whim.

We have an expect script that rolls though and emails us the socket counts for the SCCP Application process. You can do any number of things, reload the device, clear the sockets, restart SCCP application.

All of those things will disrupt the service for more or less time depending on which you choose, but when the socket count hits max it will simply stop operating anyways.

The VG204XM seems to open 1 socket (?) but the VG310/320 open one per each port that's configured, so depending on what's going on that may cause the application to disconnect, and how aggressive it retries, these can stack up quickly we found.



> -----Original Message-----
> From: Lelio Fulgenzi <lelio at uoguelph.ca>
> Sent: Friday, April 5, 2019 1:07 PM
> To: Pawlowski, Adam <ajp26 at buffalo.edu>; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] vg310/320 or ISR4K with analog modules
> 
> Yowza. That's not good. Is there a bug ID you can share? Is there a workaround?
> Software Reload? Power Reset?
> 
> 
> ---
> Lelio Fulgenzi, B.A. | Senior Analyst
> Computing and Communications Services | University of Guelph Room 037 
> Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
> 519-824-4120 Ext. 56354 | lelio at uoguelph.ca
> 
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
> 
> 
> 
> -----Original Message-----
> From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of 
> Pawlowski, Adam
> Sent: Friday, April 5, 2019 12:57 PM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] vg310/320 or ISR4K with analog modules
> 
> Would also be interested to know if there is anything going on with 
> those other than the general (maybe?) sunset of IOS eventually.
> 
> There's a bug we got filed for IOS SCCP where sockets do not get 
> cleaned up by the process, so if there are connectivity issues the 
> gateways will just not re- register or operate. It's been fixed but 
> the IOS release is not out yet. For a while we were deploying the 
> VG310/320 and found them to be unreliable because of this. This 
> impacts the VG204XM as well just takes a lot longer to become apparent.
> 
> Adam
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip