[cisco-voip] looks like we're back to rebooting the cluster after devpack install

[Lelio Fulgenzi]

Not sure why, but it looks like we're back to rebooting the cluster after installing a devpack.

While the instructions don't say so, the matrix page has been updated more recently and says:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html


When you apply a device package to enable new device support, a cluster-wide reboot is not required for Cisco Unified Communications Manager version 11.5(1) or later. Instead, after you add the device pack, do the following in Cisco Unified Communications Manager:

  *   Restart the Cisco Tomcat service on all cluster nodes.
  *   If you are running 11.5(1)SU4 or lower, 12.0(1) or 12.0(1)SU1, reboot the cluster. If you are running 11.5(1)SU5 or higher, or 12.0(1)SU2 or higher, reboot the Cisco CallManager service on the publisher node. However, if you are running the Cisco Call Manager service on the subscriber nodes only, you can skip this task.

*


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 22947 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190425/81ddf0a5/attachment.bin>