[cisco-voip] WebEx Room 70 upgrade to CE 9.5.2 No Camera detected

[Jason Aarons (Americas)]

   After upgrading a working CUCM registered Room 70 Single from CE 9.2.1 to 9.5.2 it appears from logs the camera is still stuck at firmware 9.2.1

Screen shows "No Camera Connected"

So far I have upgraded about 7 Room 55s to CE 9.5.2 and haven't had any problems.

I've opened a TAC case.


-jason

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190107/a0cd6a21/attachment.html>