[cisco-voip] Multiple COP Files Requiring Reboot

[Anthony Holloway]

Opened a PDI case for CUCM, and yes you can install multiple and reboot
once at the end.

Also, I just learned that PDI goes away at the end of this week.

On Mon, Jan 14, 2019, 10:51 AM Anthony Holloway <
avholloway+cisco-voip at gmail.com wrote:

> Looks like I had better luck than I suspected I would when googling for
> the answer.
>
> A Cisco employee responded that you can reboot once to a forum post:
>
> https://community.cisco.com/t5/unified-communications/if-i-need-to-reboot-the-cucm-cluster-after-each-of-the-following/m-p/2939154/highlight/true#M14032
>
> On Mon, Jan 14, 2019 at 10:39 AM Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
>> I should mention, that normally I would open a PDI case for this type of
>> question, however, it seems as though PDI dropped support for UCCX.  If
>> this thread doesn't get any traction, I might just open a similar case for
>> CUCM.  I thought I'd try a quick check here first.
>>
>> On Mon, Jan 14, 2019 at 10:05 AM Anthony Holloway <
>> avholloway+cisco-voip at gmail.com> wrote:
>>
>>> Can anyone confirm that one can install one or more COP files, each
>>> requiring a reboot, back to back, and just reboot once, as opposed to after
>>> each?
>>>
>>> Specifically:
>>>
>>> UCCX Struts and DST Fix COP files.
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190114/e248aebf/attachment.html>