[cisco-voip] Multiple COP Files Requiring Reboot

[Anthony Holloway]

Looks like I had better luck than I suspected I would when googling for the
answer.

A Cisco employee responded that you can reboot once to a forum post:
https://community.cisco.com/t5/unified-communications/if-i-need-to-reboot-the-cucm-cluster-after-each-of-the-following/m-p/2939154/highlight/true#M14032

On Mon, Jan 14, 2019 at 10:39 AM Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> I should mention, that normally I would open a PDI case for this type of
> question, however, it seems as though PDI dropped support for UCCX.  If
> this thread doesn't get any traction, I might just open a similar case for
> CUCM.  I thought I'd try a quick check here first.
>
> On Mon, Jan 14, 2019 at 10:05 AM Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
>> Can anyone confirm that one can install one or more COP files, each
>> requiring a reboot, back to back, and just reboot once, as opposed to after
>> each?
>>
>> Specifically:
>>
>> UCCX Struts and DST Fix COP files.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190114/6ccdb5d5/attachment.html>