[cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for Video vs Immersive Video

[Anthony Holloway]

I agree that the name isn't as useful anymore, but did you run the report?
If so, do you feel the report is accurate, or are you noticing something is
wrong with it?

Also, you didn't mention if you switched your Service Param over or not,
else, everything uses non-immersive video by default.

On Mon, Jul 22, 2019 at 4:11 PM Jason Aarons (Americas) <
jason.aarons at dimensiondata.com> wrote:

> I can’t recall a new product from the Oslo team that said Telepresence
> it.   The last products where Cisco TelePresence DX70, Cisco Telepresence
> MX200 G2 etc.  The larger 3 panel half table conference room we all
> identify as Telepresence blah.
>
>
>
> New huddle space products customers like are the Cisco Webex Board 55,
> Cisco Webex Room 55/70.  Based on testing these WebEx Room blah are no
> longer Immersive Video (on right in Regions) but just video endpoints
> similar to a 8845/8865.
>
>
>
> Guess I was going by the video screen size.  Big meant Telepresence.
> Struggle was TAC SE didn’t know what Immersive Video vs Video was.  The
> CCIE Collab lab is pretty clear the 8845/65 are just video as you have
> tasks related to regions.
>
>
>
> *From:* Anthony Holloway <avholloway+cisco-voip at gmail.com>
> *Sent:* Monday, July 22, 2019 10:22 AM
> *To:* Jason Aarons (Americas) <jason.aarons at dimensiondata.com>
> *Cc:* cisco-voip (cisco-voip at puck.nether.net) <cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for
> Video vs Immersive Video
>
>
>
>
>
> Did you already change the value of Service Parameter: Use Video
> BandwidthPool for Immersive Video Calls?
>
>
>
> The classification is per version of CUCM, and thus can be queried in
> CUCM.  See below from SRND.
>
>
>
> *Endpoint Classification*
> Cisco TelePresence endpoints have a fixed non-configurable Video Call
> Traffic Class of immersive and are identified by Unified CM as *immersive*.
> Telepresence endpoints are defined in Unified CM by the device type. When a
> device is added in Unified CM, any device with TelePresence in the name of
> the device type is classified as *immersive*, as are the generic
> single-screen and multi-screen room systems. Another way to check the
> capabilities of the endpoints in the Unified CM is to go to the *Cisco
> Unified Reporting Tool > System Reports > Unified CM Phone Feature List*.
> In the feature drop down list, select *Immersive Video Support for
> TelePresence Devices* ; in the product drop down list, select *All*. This
> will display all of the device types that are classified as *immersive*.
> All other endpoints have a fixed Video Call Traffic Class of *desktop*
> due to their lack of the non-configurable *immersive *attribute.
>
>
>
> Source: CUCM 11.x SRND
> <https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html#pgfId-1489913>
>
>
>
> On Sun, Jul 21, 2019 at 6:51 PM Jason Aarons (Americas) <
> jason.aarons at dimensiondata.com> wrote:
>
>
>
>
>
> Where is there a definitive list of what is Immersive?  Is a Room 55
> Immersive?
>
>
>
> From my training the left is 88xx video and right were products formerly
> made by Tandberg such as Room 55/DX80/SX80/MX300 etc
>
>
>
> In a Room 55 trying to figure out if it is left or right side.
>
>
>
>
>
> -jason
>
>
>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer"
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> itevomcid
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190723/b901fd0b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 20083 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190723/b901fd0b/attachment.png>