[cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for Video vs Immersive Video

[Jason Aarons (Americas)]

I can’t recall a new product from the Oslo team that said Telepresence it.   The last products where Cisco TelePresence DX70, Cisco Telepresence MX200 G2 etc.  The larger 3 panel half table conference room we all identify as Telepresence blah.

New huddle space products customers like are the Cisco Webex Board 55, Cisco Webex Room 55/70.  Based on testing these WebEx Room blah are no longer Immersive Video (on right in Regions) but just video endpoints similar to a 8845/8865.

Guess I was going by the video screen size.  Big meant Telepresence.  Struggle was TAC SE didn’t know what Immersive Video vs Video was.  The CCIE Collab lab is pretty clear the 8845/65 are just video as you have tasks related to regions.

From: Anthony Holloway <avholloway+cisco-voip at gmail.com>
Sent: Monday, July 22, 2019 10:22 AM
To: Jason Aarons (Americas) <jason.aarons at dimensiondata.com>
Cc: cisco-voip (cisco-voip at puck.nether.net) <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for Video vs Immersive Video


Did you already change the value of Service Parameter: Use Video BandwidthPool for Immersive Video Calls?

The classification is per version of CUCM, and thus can be queried in CUCM.  See below from SRND.

Endpoint Classification
Cisco TelePresence endpoints have a fixed non-configurable Video Call Traffic Class of immersive and are identified by Unified CM as immersive. Telepresence endpoints are defined in Unified CM by the device type. When a device is added in Unified CM, any device with TelePresence in the name of the device type is classified as immersive, as are the generic single-screen and multi-screen room systems. Another way to check the capabilities of the endpoints in the Unified CM is to go to the Cisco Unified Reporting Tool > System Reports > Unified CM Phone Feature List. In the feature drop down list, select Immersive Video Support for TelePresence Devices ; in the product drop down list, select All. This will display all of the device types that are classified as immersive. All other endpoints have a fixed Video Call Traffic Class of desktop due to their lack of the non-configurable immersive attribute.

Source: CUCM 11.x SRND<https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html#pgfId-1489913>

On Sun, Jul 21, 2019 at 6:51 PM Jason Aarons (Americas) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:


Where is there a definitive list of what is Immersive?  Is a Room 55 Immersive?

From my training the left is 88xx video and right were products formerly made by Tandberg such as Room 55/DX80/SX80/MX300 etc

In a Room 55 trying to figure out if it is left or right side.

[cid:image001.png at 01D540B0.469D3FB0]

-jason




This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://puck.nether.net/mailman/listinfo/cisco-voip>


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190722/cf51393a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 20083 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190722/cf51393a/attachment.png>