[cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for Video vs Immersive Video
Lelio Fulgenzi
lelio at uoguelph.ca
Mon Jul 22 10:28:23 EDT 2019
Very interesting!
I will have to look this up.
Good thread.
-sent from mobile device-
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<x-apple-data-detectors://1/0>
519-824-4120 Ext. 56354<tel:519-824-4120;56354> | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook
[University of Guelph Cornerstone with Improve Life tagline]
On Jul 22, 2019, at 10:22 AM, Anthony Holloway <avholloway+cisco-voip at gmail.com<mailto:avholloway+cisco-voip at gmail.com>> wrote:
Did you already change the value of Service Parameter: Use Video BandwidthPool for Immersive Video Calls?
The classification is per version of CUCM, and thus can be queried in CUCM. See below from SRND.
Endpoint Classification
Cisco TelePresence endpoints have a fixed non-configurable Video Call Traffic Class of immersive and are identified by Unified CM as immersive. Telepresence endpoints are defined in Unified CM by the device type. When a device is added in Unified CM, any device with TelePresence in the name of the device type is classified as immersive, as are the generic single-screen and multi-screen room systems. Another way to check the capabilities of the endpoints in the Unified CM is to go to the Cisco Unified Reporting Tool > System Reports > Unified CM Phone Feature List. In the feature drop down list, select Immersive Video Support for TelePresence Devices ; in the product drop down list, select All. This will display all of the device types that are classified as immersive. All other endpoints have a fixed Video Call Traffic Class of desktop due to their lack of the non-configurable immersive attribute.
Source: CUCM 11.x SRND<https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html#pgfId-1489913>
On Sun, Jul 21, 2019 at 6:51 PM Jason Aarons (Americas) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:
Where is there a definitive list of what is Immersive? Is a Room 55 Immersive?
From my training the left is 88xx video and right were products formerly made by Tandberg such as Room 55/DX80/SX80/MX300 etc
In a Room 55 trying to figure out if it is left or right side.
<image001.png>
-jason
This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190722/50c9275c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 20083 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190722/50c9275c/attachment.png>
More information about the cisco-voip
mailing list