[cisco-voip] 8851: always use first line for outbound calls with multiline

[Cannizzaro, Vince]

What about the option on the device page “Show All Calls on Primary Line” , setting it to Enabled, that could help.

Thanks,
Vince

From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Reto Gassmann
Sent: March 20, 2019 5:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 8851: always use first line for outbound calls with multiline

Hello Group

we have some IP Phones (8851) with two lines. For outgoing calls the first line is always used.
However, if the user receives a call on the second line (This is his secret privat line), the next outgoing call is initiated from the second line and sends the wrong (privat) number.
Is it possible to configure the phone that allways and automatically the first line is used for an outgoing call.
We have CUCM 10.5 and 8851 IP Phones.

Thanks a lot
Regards Reto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190320/84bae011/attachment.html>