[cisco-voip] one way voice issue for outgoing calls and call diversion suggestions

[naresh rathore]

hi All,



  1.  last year my colleague configured SIP trunk with digit manipulation on CUBE. now i changed CUBE config so that digit manipulation happens on CUCM rather then CUBE. after the configuration change, when i call from cisco phone to mobile, mobile user can hear voice but not vice versa. also i cant hear ringing tone on cisco phone when calling mobile number incoming call from mobile to cisco phone have two way voice some times. how to approach this sip issue.
  2.  when i configure call forwarding on cisco phone (phone 1) to user1's mobile phone and incoming calls from mobile or another cisco phone (phone 2) should their own number (phone 2 did and mobile number), what changes to be done on CUCM/CUBE to show diversion number (phone 2 did and mobile number)
  3.  i have two cucm cluster as well, phone registered to cucm1 when make call to phone registered to cucm2 and forwarded to mobile then on mobile i would like to see phone 1 number. call between cucm1 and cucm2 is extension based, what changes to be done on CUCM to show diversion number (phone 2 did and mobile number)

Regards


Naray
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20191029/7bec78bb/attachment.htm>