[cisco-voip] Jabber with CCX , over MRA

Anthony Holloway avholloway+cisco-voip at gmail.com
Tue Sep 17 13:31:47 EDT 2019


The UCCX 12.x SRND is telling us that an end point (like CSF or 8851)
registered via MRA is supported as an Agent device.

It also tells us that the Agent's access to Finesse for sign-in/state
changes is only available over VPN or direct internet access to Finesse.

However, if VPN is all you got, then Jabber over MRA is not necessary.
Therefore, expose your Finesse to the internet (port usage guide) and have
your cake and eat it too.

On Tue, Sep 17, 2019 at 11:57 AM Pawlowski, Adam <ajp26 at buffalo.edu> wrote:

> Good afternoon all,
>
>
>
> Just trying to get my notes together on the subject of using Jabber as an
> agent softphone, with UCCX (12) , over MRA. Recently saw some commentary
> that it is not supported, but, it’s not explicitly called out that I can
> tell.
>
>
>
> The CCX SRND mentions that Expressway is supported “as an endpoint”,
> Jabber can be used, but doesn’t call any specific limitation to the two.
> This guide does say that Multiline is not supported which seemed to be new.
>
>
>
> As far as I can tell it is working just fine to use with Finesse over MRA,
> the only thing I haven’t done yet is looked at traffic to see if it/CTI
> works because it can reach the UCM directly.
>
>
>
> Anyone have any experience with trying to implement that, or, if they know
> for sure it is problematic or … not ?
>
>
>
> Adam
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190917/e16840f6/attachment.htm>


More information about the cisco-voip mailing list