[cisco-voip] CCX Editor Step Properties

[UC Penguin]

It’s much faster if the client is run at the same site as the uccx server (RDP to a machine with the editor installed).

Not an option that’s possible for all, but there is a huge improvement. Especially when using the debugger.


> On Sep 24, 2019, at 10:52, Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:
> 
> I’ve seen it editing scripts locally, in the repository, versions old and new.  
>  
>  	
> Matthew Loraditch​
> Sr. Network Engineer
> p: 443.541.1518
> w: www.heliontechnologies.com	 | 	e: MLoraditch at heliontechnologies.com
> <image792049.png>
> <image341046.png>
> <image016981.png>
> <image126101.png>
> From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Johnson, Tim
> Sent: Tuesday, September 24, 2019 11:47 AM
> To: Anthony Holloway <avholloway+cisco-voip at gmail.com>
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CCX Editor Step Properties
>  
> Yeah, it’s still an issue in 12.0. Right now it’s opening properties for me in 1-2 seconds, other times it’s 10.
>  
> Would be nice if they did a full makeover of the tool, but I don’t expect it.
>  
> From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Anthony Holloway
> Sent: Tuesday, September 24, 2019 11:11 AM
> To: Matthew Loraditch <MLoraditch at heliontechnologies.com>
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CCX Editor Step Properties
>  
> I would like to know this too!  Seems to be different lengths of delay depending on a few factors, however, I have not nailed down what those factors are.  If it happened more often, I'd put some time into it, but since it's generally quick-ish, I ignore it.
>  
> I have one system I access exclusively via AnyConnect, and it's running 11.6(2), and it's god awful slow.  Just clicking Add on the Set Enterprise Call Info step takes like 10-20 seconds for the dialog box to pop open.
>  
> On Tue, Sep 24, 2019 at 9:51 AM Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:
> Is there anyway on this earth to make this load faster???  Currently painfully going through a script and setting up new parameters and slowly dying of impatience as I click properties and wait a seeming eternity for the window to open.
> This has been a pet peeve forever.
>  
> Matthew Loraditch​
> Sr. Network Engineer
> p: 443.541.1518
> w: www.heliontechnologies.com
>  | 
> e: MLoraditch at heliontechnologies.com
> <image001.png>
> <image002.png>
> <image003.png>
> <image004.png>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190924/8eeafd89/attachment.htm>