[cisco-voip] sip 404 not found for incoming calls
naresh rathore
nareh84 at hotmail.com
Thu Apr 30 09:43:37 EDT 2020
hi Ryan
isnt following message and translatorx shows that message is generated from cucm?
Apr 30 15:38:32.746: //333290/A9BE833B92A3/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not found
Via: SIP/2.0/UDP 10.11.162.253:5060;branch=z9hG4bK3D83325A5
From: <sip:+61290068214 at 10.11.162.253>;tag=958DA8EB-11B7
To: <sip:44608152 at 10.10.160.101>;tag=SD8bs8d99-2125103490-1588225112722
Call-ID: A9BF46B9-89DB11EA-92A9A159-D2984C5B at 10.11.162.253
CSeq: 101 INVITE
Timestamp: 1588225112
Content-Length: 0
[cid:c7844cd7-32a2-464e-ae60-33f62f5499c0]
Regards
________________________________
From: Ryan Huff <ryanhuff at outlook.com>
Sent: Thursday, April 30, 2020 11:31 PM
To: naresh rathore <nareh84 at hotmail.com>
Cc: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls
Thanks.
The 404 is sourced from the gi1/0/1 interface IP address. If CUCM initiated the 404 I would expect CUCM’s IP address to be the source of the 404.
It seems like this is config as “sip on a stick” (a router with a single interface used for inbound and outbound SIP traffic). A little more challenging, not impossible, but more challenging.
It would be outstanding if you could make the gi0/0/0 interface an “outside” interface in a different network, then bind the dial peers appropriately... again, not material to the issue outhand.
Once you have the inout debuts, please send it ove.
Sent from my iPhone
On Apr 30, 2020, at 09:06, naresh rathore <nareh84 at hotmail.com> wrote:
hi
Pls find the attached ccsip messages and cube config. i will send voice ccapi inout config tomorrow. outgoing call works fine but cucm respond with 404 message during incoming call attempt
Regards
________________________________
From: Ryan Huff <ryanhuff at outlook.com>
Sent: Thursday, April 30, 2020 10:50 PM
To: naresh rathore <nareh84 at hotmail.com>
Cc: Amit Kumar <amit3.kum at gmail.com>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls
Naresh,
Any chance you could send a ccsip messages and a voice ccapi inout debug from a failed inbound call?
Sent from my iPhone
On Apr 30, 2020, at 06:28, naresh rathore <nareh84 at hotmail.com> wrote:
hi
I tried both, via translation pattern or directly pointing a particular number to phone but still the same result.
Regards
________________________________
From: Amit Kumar <amit3.kum at gmail.com>
Sent: Thursday, April 30, 2020 6:41 PM
To: naresh rathore <nareh84 at hotmail.com>
Cc: James B <james.buchanan2 at gmail.com>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls
Are you having a dn, exact to called number, of you are doing some translation, then make sure route pattern incoming css shoold have access to xlate pt. Nd xlate css shoud have access to phones pt.
On Thu, Apr 30, 2020, 2:02 PM naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>> wrote:
hi,
Thanks for the reply.
pls see following snapshot and attached gateway config. outgoing dialpeer (200,201) is currently matching correctly to cucm (for incoming call)
[cid:9c8082fb-a47a-4859-8d73-bd22200523c5]
[cid:f721c217-c6cf-4fd5-bbc6-10962f7f7269]
[cid:2300f744-b399-4d90-ab4b-133bb37a3611]
[cid:a2643290-7308-42d9-b6bc-699c2df07a6f]
Regards
Naray
________________________________
From: James B <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>>
Sent: Thursday, April 30, 2020 5:39 PM
To: naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: RE: [cisco-voip] sip 404 not found for incoming calls
Hello,
Can you send your gateway configuration and a screenshot of your CUCM trunk configuration? That’d give us more to go off of.
Thanks,
James
From: naresh rathore<mailto:nareh84 at hotmail.com>
Sent: 30 April 2020 08:36
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] sip 404 not found for incoming calls
hi,
i have cucm version 12.0. outgoing call is working without any issue. but incoming call is failing. the call request is received by cucm but its responding with 404 not found. i checked CSS and also pointed call directly to ip phone using significant digits and incoming css but still the same issue. also sip uri have called number. not sure why 404 not found msg is sent by cucm to cube.
Regards
Naray
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7C%7C6523e72539454f133b1408d7ed073f58%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238487707512961&sdata=AGbxo4YndgaFtcJPGOkk1c71IwqeCBpLXtFJ1adJ0NM%3D&reserved=0>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7C%7C01617e1596284dca88b408d7ecf129b1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238392830439677&sdata=%2BBocnzBxzrQDeGY8H4FLLCSBtxWvNCm8i%2FY8km%2F3t7o%3D&reserved=0
<detailed ccsip messages.txt>
<gatewayconfig.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/fec39134/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 89301 bytes
Desc: image.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/fec39134/attachment.png>
More information about the cisco-voip
mailing list