[cisco-voip] sip 404 not found for incoming calls

Thu Apr 30 09:50:31 EDT 2020

Hi Naray,

What I would suggest is let's say your incoming DID number is 44608152,

let's say you have a DID partition DID_PT and an internal number partition Internal_PT (This is the partition of your internal DN)

Now make sure that NZ_CUBE_INBOUND_CSS is a CSS which have access to the DID_PT (You can create a different CSS which have only access to this partition for testing purposes )

then create a translation pattern and this pattern needs to be in DID_PT partition and this translation pattern needs to translate the 4460XXXX to XXXX
where XXXX is your internal DN in partition Internal_PT

The translation pattern CSS is let's say TRANSLATION_CSS this css should have access to Internal_PT

Let me know if this helps.

Thanks!

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook
[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of naresh rathore
Sent: Thursday, April 30, 2020 9:44 AM
To: Ryan Huff <ryanhuff at outlook.com>; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] sip 404 not found for incoming calls

hi Ryan

isnt following message and translatorx shows that message is generated from cucm?

Apr 30 15:38:32.746: //333290/A9BE833B92A3/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 404 Not found

Via: SIP/2.0/UDP 10.11.162.253:5060;branch=z9hG4bK3D83325A5

From: <sip:+61290068214 at 10.11.162.253>;tag=958DA8EB-11B7

To: <sip:44608152 at 10.10.160.101>;tag=SD8bs8d99-2125103490-1588225112722

Call-ID: A9BF46B9-89DB11EA-92A9A159-D2984C5B at 10.11.162.253<mailto:A9BF46B9-89DB11EA-92A9A159-D2984C5B at 10.11.162.253>

CSeq: 101 INVITE

Timestamp: 1588225112

Content-Length: 0

[cid:image002.png at 01D61ED4.C85A9D10]

Regards
________________________________
From: Ryan Huff <ryanhuff at outlook.com<mailto:ryanhuff at outlook.com>>
Sent: Thursday, April 30, 2020 11:31 PM
To: naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls

Thanks.

The 404 is sourced from the gi1/0/1 interface IP address. If CUCM initiated the 404 I would expect CUCM’s IP address to be the source of the 404.

It seems like this is config as “sip on a stick” (a router with a single interface used for inbound and outbound SIP traffic). A little more challenging, not impossible, but more challenging.

It would be outstanding if you could make the gi0/0/0 interface an “outside” interface in a different network, then bind the dial peers appropriately... again, not material to the issue outhand.

Once you have the inout debuts, please send it ove.

Sent from my iPhone

On Apr 30, 2020, at 09:06, naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>> wrote:

hi

Pls find the attached ccsip messages and cube config. i will send voice ccapi inout config tomorrow. outgoing call works fine but cucm respond with 404 message during incoming call attempt

Regards

________________________________
From: Ryan Huff <ryanhuff at outlook.com<mailto:ryanhuff at outlook.com>>
Sent: Thursday, April 30, 2020 10:50 PM
To: naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>>
Cc: Amit Kumar <amit3.kum at gmail.com<mailto:amit3.kum at gmail.com>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls

Naresh,

Any chance you could send a ccsip messages and a voice ccapi inout debug from a failed inbound call?

Sent from my iPhone

On Apr 30, 2020, at 06:28, naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>> wrote:

hi

I tried both, via translation pattern or directly pointing a particular number to phone but still the same result.

Regards

________________________________
From: Amit Kumar <amit3.kum at gmail.com<mailto:amit3.kum at gmail.com>>
Sent: Thursday, April 30, 2020 6:41 PM
To: naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>>
Cc: James B <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] sip 404 not found for incoming calls

Are you having a dn, exact to called number, of you are doing some translation, then make sure route pattern incoming css shoold have access to xlate pt. Nd xlate css shoud have access to phones pt.

On Thu, Apr 30, 2020, 2:02 PM naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>> wrote:
hi,

Thanks for the reply.

pls see following snapshot and attached gateway config. outgoing dialpeer (200,201) is currently matching correctly to cucm (for incoming call)

[cid:9c8082fb-a47a-4859-8d73-bd22200523c5]
[cid:f721c217-c6cf-4fd5-bbc6-10962f7f7269]
[cid:2300f744-b399-4d90-ab4b-133bb37a3611]
[cid:a2643290-7308-42d9-b6bc-699c2df07a6f]

Regards

Naray
________________________________
From: James B <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>>
Sent: Thursday, April 30, 2020 5:39 PM
To: naresh rathore <nareh84 at hotmail.com<mailto:nareh84 at hotmail.com>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: RE: [cisco-voip] sip 404 not found for incoming calls

Hello,

Can you send your gateway configuration and a screenshot of your CUCM trunk configuration? That’d give us more to go off of.

Thanks,

James

From: naresh rathore<mailto:nareh84 at hotmail.com>
Sent: 30 April 2020 08:36
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] sip 404 not found for incoming calls

hi,

i have cucm version 12.0. outgoing call is working without any issue. but incoming call is failing. the call request is received by cucm but its responding with 404 not found. i checked CSS and also pointed call directly to ip phone using significant digits and incoming css but still the same issue. also sip uri have called number. not sure why 404 not found msg is sent by cucm to cube.

Regards

Naray

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7C%7C6523e72539454f133b1408d7ed073f58%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238487707512961&sdata=AGbxo4YndgaFtcJPGOkk1c71IwqeCBpLXtFJ1adJ0NM%3D&reserved=0>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7C%7C01617e1596284dca88b408d7ecf129b1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238392830439677&sdata=%2BBocnzBxzrQDeGY8H4FLLCSBtxWvNCm8i%2FY8km%2F3t7o%3D&reserved=0
<detailed ccsip messages.txt>
<gatewayconfig.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/0e9ac588/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 3029 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/0e9ac588/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 89301 bytes
Desc: image002.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/0e9ac588/attachment-0001.png>