[cisco-voip] Is CME media flow through by default?

[Anthony Holloway]

I agree with you Brian, so then, why do so many people type the
command address-hiding in to their CUBE configuration?  It just baffles me.

On Wed, Jul 29, 2020 at 1:36 PM Brian Meade <bmeade90 at vt.edu> wrote:

> Yea, CUBE is really just any config in which it's IP to IP on both sides
> of the router.  CME with a SIP or SCCP phone and a VoIP dial-peer to a SIP
> carrier would be flow-through/address-hiding by default just like any VoIP
> dial-peer by default.
>
> On Wed, Jul 29, 2020 at 4:13 AM Gerence Guan <cisco.guan at gmail.com> wrote:
>
>> Hi all
>>
>> If using Cisco SIP IP phone on CME which terminates the SIP trunk from
>> service provider SBC, will it be media flow through by default? Can CME do
>> the IP address hiding between the voice vlan and service provider, like
>> what CUBE does?
>>
>> Best Regards,
>> Guan
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200730/3745f914/attachment.htm>