[cisco-voip] Is CME media flow through by default?

[Brian Meade]

Gotta make sure it's extra hidden!

On Thu, Jul 30, 2020 at 2:07 PM Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> I agree with you Brian, so then, why do so many people type the
> command address-hiding in to their CUBE configuration?  It just baffles me.
>
> On Wed, Jul 29, 2020 at 1:36 PM Brian Meade <bmeade90 at vt.edu> wrote:
>
>> Yea, CUBE is really just any config in which it's IP to IP on both sides
>> of the router.  CME with a SIP or SCCP phone and a VoIP dial-peer to a SIP
>> carrier would be flow-through/address-hiding by default just like any VoIP
>> dial-peer by default.
>>
>> On Wed, Jul 29, 2020 at 4:13 AM Gerence Guan <cisco.guan at gmail.com>
>> wrote:
>>
>>> Hi all
>>>
>>> If using Cisco SIP IP phone on CME which terminates the SIP trunk from
>>> service provider SBC, will it be media flow through by default? Can CME do
>>> the IP address hiding between the voice vlan and service provider, like
>>> what CUBE does?
>>>
>>> Best Regards,
>>> Guan
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200730/ddd46338/attachment.htm>