[cisco-voip] Jabber and Finesse

[Johnson, Tim]

Looks like Terry should be okay with that setting, being on 12.5, but for others who may try this setting, be aware of this bug: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh48379/?reffering_site=dumpcr

I just ran into it on Monday, being on CUCM 12.0(1.10000.10).

From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Pawlowski, Adam
Sent: Thursday, March 19, 2020 8:56 AM
To: 'Terry Oakley' <Terry.Oakley at rdc.ab.ca>; jcolon424 at gmail.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Jabber and Finesse

Hi Terry - there's one other element to the setup that needs to be set in the VCS if it's not.

Maybe this is it?

Step 1
Go to VCS-C.
Step 2
Select VSC-C configuration > Unified Communication > Configuration > SIP Path headers and set it to On.

There's not really anything too substantial to configure otherwise. The CSF needs to be in the rmjtapi or rmcm or whatever application user's associated devices list, and then it "just works"

If you're getting that call cannot be completed message then it almost sounds like that line isn't registered and it has no other actions like VM or forwarding, which it shouldn't.

Adam

From: Terry Oakley <Terry.Oakley at rdc.ab.ca<mailto:Terry.Oakley at rdc.ab.ca>>
Sent: Wednesday, March 18, 2020 10:25 PM
To: jcolon424 at gmail.com<mailto:jcolon424 at gmail.com>; Pawlowski, Adam <ajp26 at buffalo.edu<mailto:ajp26 at buffalo.edu>>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: RE: [cisco-voip] Jabber and Finesse

Thank you for the quick replies.   I know all of you are undergoing immense pressure so I truly appreciate the assistance.   I have triple checked that the UCCX extension is just on the Jabber Windows client.  When I try and dial the extension I get the nice Cisco lady telling me the number cannot be completed as dialed.   If I dial the primary extension on the Jabber client it works.    If I put the UCCX extension on a physical set (8851) it will ring.

When I am on the Jabber Windows client I have checked the CSS for the UCCX extension it is fine, same as the primary line.  Double checked to make sure the extension was an active number.     Allow Control of Device from CTI is enabled.   There must be some little check box or something that I have missed but I have stared at the page so long it all looks the same.

Thanks again

Terry



________________________________
From: Jose Colon II <jcolon424 at gmail.com<mailto:jcolon424 at gmail.com>>
Sent: Wednesday, March 18, 2020 4:38:26 PM
To: Pawlowski, Adam <ajp26 at buffalo.edu<mailto:ajp26 at buffalo.edu>>
Cc: Terry Oakley <Terry.Oakley at rdc.ab.ca<mailto:Terry.Oakley at rdc.ab.ca>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] Jabber and Finesse

CAUTION: This email is from an external source. Do not click links or open attachments unless you recognize the sender and know the content is safe.
I think that is the key to the issue. UCCX extension can only be registered to one device.

On Wed, Mar 18, 2020 at 5:37 PM Pawlowski, Adam <ajp26 at buffalo.edu<mailto:ajp26 at buffalo.edu>> wrote:

Hi Terry,



I had the same problem when I had my CCX extension on multiple items, even when unregistered. Clicking on ready resulted in an error, but the first time I made a call with it by opening the keypad it started working and I could go ready. Since the CCX extension is just an extension, you should be able to dial it regardless of what Finesse is doing, assuming it is in a partition that you can dial but it may not be.



After I made sure the extension was on nothing but my Jabber client, and I had signed out and back in, it began to work fine.



I haven't heard any comments from anyone else and we moved ~75 seats to Jabber MRA and Finesse remote this week.



Adam



From: cisco-voip <cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>> On Behalf Of Terry Oakley via cisco-voip
Sent: Wednesday, March 18, 2020 6:29 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Jabber and Finesse



We have on prem CUCM running 12.5.1.   We also have IM and Presence and UCCX for our phone queues.   I am trying to figure out if I can move our phone queues to Jabber and connect to Finesse via remote access (through VM Ware).    I seem to be able to get part way but when I try to make a call to the queue the Finesse line will not answer and unless I go off hook first on the Jabber app I cannot go to Ready on the Finesse side .   I cannot even dial it just directly.   I can use that line and dial out from Jabber but for some reason I cannot get the line to be recognized on the Finesse side.   I am sure I probably missed something in my haste so if anyone of you have successfully done something like this I would appreciate a simple how to.



I hope all of you are safe and your families as well.



Terry





Terry Oakley

Telecommunications Coordinator | Information Technology Services

Red Deer College |100 College Blvd. | Box 5005 | Red Deer | Alberta | T4N 5H5

work (403) 342-3521   |  FAX (403) 343-4034




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://can01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7CTerry.Oakley%40rdc.ab.ca%7Cf383f5995c5d47ccfcc008d7cb8d19cf%7C3aed1c227c31455eb67a279994fffbd6%7C1%7C0%7C637201679193672135&sdata=L32nXHNO05zr6NdhPi8lafjvuUZkRqGghnn3i1AzgbA%3D&reserved=0>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200319/6e9bf37a/attachment.htm>