[cisco-voip] Mitel 3300 anyone?

[Myron Young]

We did something similar as well with SIP trunk from Mitel controller to CUCM. I remember there needing to be a trunk to each node on the Mitel side if a call would traverse multiple controllers in the Mitel cluster. And sip paths were limited to the Mitel sip licenses you owned on that system.

On Mar 23, 2020, at 9:03 PM, Charles Goldsmith <w at woka.us> wrote:


I set one up years ago, but direct between CUCM and Mitel, and I remember it being a pain and had to reach out to TAC for help.  This was back around the 7 or 8.0 days.

Sorry, not much help there, but we did get it to pass calls.

On Mon, Mar 23, 2020 at 7:48 PM Dana Tong <dana.tong at yellit.com.au<mailto:dana.tong at yellit.com.au>> wrote:
Hi all,

Anyone ever done anything with a MITEL 3300?

I am trying to setup a SIP trunk to CUBE. The trunk “appears” to be up on both ends.
I can see OPTIONS pings from MITEL.
But no calls from Cisco to MITEL go through. I get a 404 Not Found and I’m trying to get some kind of logs out of the MITEL to see how it is processing the TO address.
I’m sending 9 digits with an configured to absorb 5. So you would think it should just match the 4 digit extension.

Cheers
Dana


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200324/8dcdc535/attachment.htm>