[cisco-voip] SIP overlapping DN's

[Kent Roberts]

You can prepend digits from each pri and adjust in cucm……. You can setup profiles….

Are you using full 10 or 11 digits from your carrier?   If not, that would be a whole lot easier once moving to the world of sip

> On Oct 21, 2020, at 12:42 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> 
> I have three PRI;s on a VGW that are Voice DN's.
> I have one PRI that overlaps DN's but it's connected to our Right Fax server.
> 
> right Now I'm doing MGCP. but moving to SIP to support Gateway based recording.
> 
> with MGCP I can use partitions to route the two different sets of DN's.  How do I do that with SIP?
> 
> TIA
> 
> Scott
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip